amendment list, 5 June 2025

Electric vehicle supply equipment, compressed gas dispensers, and electricity, gas and thermal energy meters

Document IMCO-AM-774329 · (COM(2024)0561 – C100205/204 – 2024/0311(COD))

Committee on the Internal Market and Consumer Protection

Where the law stands · dossier 2024/0311 →

On Parliament’s site PDF Word

Full text

Jump to an amendment (14)

Amendment 20
Amendment 21
Amendment 22
Amendment 23
Amendment 24
Amendment 25
Amendment 26
Amendment 27
Amendment 28
Amendment 29
Amendment 30
Amendment 31
Amendment 32
Amendment 33

Text 109 paragraphs

Amendment 20

Stefano Cavedagna

Proposal for a directive

Recital 4

Text proposed by the Commission	Amendment
Text proposed by the Commission(4) Annex I to Directive 2014/32/EU should be amended in order to take into account the roll out of smart gas and electricity meters and the new measuring instruments covered by the new instrument-specific Annexes.	Amendment(4) Annex I to Directive 2014/32/EU should be amended in order to take into account the roll out of smart gas, water and electricity meters and the new measuring instruments covered by the new instrument-specific Annexes.

Or. it

Amendment 21

Stefano Cavedagna

Proposal for a directive

Article 2 – paragraph 2

Text proposed by the Commission	Amendment
Text proposed by the Commission2. By way of derogation from Article 7(2) of Directive 2014/32/EU, certificates issued under Directive 2014/32/EU and national certificates, covering measuring instruments that fall in the scope of Directive 2014/32/EU from [OP please insert the date = date of entry into force of this Directive] and that have been placed on the market before [OP please insert the date = 24 months after the date of entry into force of this Directive], shall remain valid until the expiry of their validity, and in any case no longer than until [OP please insert the date = 12 years from the date of entry into force of this Directive].	Amendment2. By way of derogation from Article 7(2) of Directive 2014/32/EU, certificates issued under Directive 2014/32/EU and national certificates covering measuring instruments that fall in the scope of Directive 2014/32/EU from [OP please insert the date = date of entry into force of this Directive] shall remain valid until the expiry of their validity.

Text proposed by the Commission

Amendment

2. By way of derogation from Article 7(2) of Directive 2014/32/EU, certificates issued under Directive 2014/32/EU and national certificates, covering measuring instruments that fall in the scope of Directive 2014/32/EU from [OP please insert the date = date of entry into force of this Directive] and that have been placed on the market before [OP please insert the date = 24 months after the date of entry into force of this Directive], shall remain valid until the expiry of their validity, and in any case no longer than until [OP please insert the date = 12 years from the date of entry into force of this Directive].

2. By way of derogation from Article 7(2) of Directive 2014/32/EU, certificates issued under Directive 2014/32/EU and national certificates covering measuring instruments that fall in the scope of Directive 2014/32/EU from [OP please insert the date = date of entry into force of this Directive] shall remain valid until the expiry of their validity.

Or. it

Read the rest (97 paragraphs)

Amendment 22

Ivars Ijabs, Svenja Hahn

Proposal for a directive

Article 3 – paragraph 1 – subparagraph 2

Text proposed by the Commission	Amendment
Text proposed by the CommissionThey shall apply those provisions from [Note to PO: insert exact date – [24 months] after entry into force of this Directive].	AmendmentThey shall apply those provisions from [Note to PO: insert exact date – [36 months] after entry into force of this Directive].

Or. en

Amendment 23

Ivars Ijabs, Svenja Hahn

Proposal for a directive

Annex I – paragraph 1 – point 2

Directive 2014/32/EU

Annex I – point 10.2

Text proposed by the Commission	Amendment
Text proposed by the Commission10.2. The indication of any result shall be clear and unambiguous, protected against accidental deletion, and accompanied by such marks and inscriptions necessary to inform the user of the significance of the result. Easy reading of the presented result shall be permitted under normal conditions of use. Additional indications may be shown provided they cannot be confused with the metrologically controlled indications.;	Amendment10.2. The indication of any result must be unequivocally clear and unambiguous, protected against accidental deletion or modification, and accompanied all necessary marks and inscriptions necessary to inform the user of the significance of the result. Effortless reading of the presented result shall be permitted under normal conditions of use. Additional indications may be shown provided they, under any circumstances, cannot be confused with the metrologically controlled indications.;

Text proposed by the Commission

Amendment

10.2. The indication of any result shall be clear and unambiguous, protected against accidental deletion, and accompanied by such marks and inscriptions necessary to inform the user of the significance of the result. Easy reading of the presented result shall be permitted under normal conditions of use. Additional indications may be shown provided they cannot be confused with the metrologically controlled indications.;

10.2. The indication of any result must be unequivocally clear and unambiguous, protected against accidental deletion or modification, and accompanied all necessary marks and inscriptions necessary to inform the user of the significance of the result. Effortless reading of the presented result shall be permitted under normal conditions of use. Additional indications may be shown provided they, under any circumstances, cannot be confused with the metrologically controlled indications.;

Or. en

Amendment 24

Stefano Cavedagna

Proposal for a directive

Annex I – paragraph 1 – point 3

Directive 2014/32/EU

Annex I – point 10.6 – subparagraph 1

Text proposed by the Commission	Amendment
Text proposed by the CommissionBy way of derogation from points 10.1. and 10.5., for gas and electricity meters, measuring systems for electric vehicle supply equipment (‘EVSE’) and measuring systems for compressed gas dispensers the following shall apply:	AmendmentBy way of derogation from points 10.1. and 10.5., for gas, water and electricity meters, measuring systems for electric vehicle supply equipment (‘EVSE’) and measuring systems for compressed gas dispensers the following shall apply:

Or. it

Amendment 25

Ivars Ijabs, Svenja Hahn

Proposal for a directive

Annex I – paragraph 1 – point 3

Directive 2014/32/EU

Annex I – point 10.6 – subparagraph 2 – point a

Text proposed by the Commission	Amendment
Text proposed by the Commission(a) be fitted with a metrologically controlled display, readout and/or printer accessible without tools to present the relevant data;	Amendment(a) be fitted with an affixed and tamper-evident metrologically controlled display, readout and/or printer accessible without tools to present the relevant data;

Or. en

Amendment 26

Ivars Ijabs, Svenja Hahn

Proposal for a directive

Annex I – paragraph 1 – point 3

Directive 2014/32/EU

Annex I – point 10.6 – subparagraph 2 – point b

Text proposed by the Commission	Amendment
Text proposed by the Commission(b) present the relevant data on a remote display accessible without tools or on a device of the consumer or end-user.	Amendment(b) present the relevant data in a secure and verifiable way on a remote display accessible without tools or on a device of the consumer or end-user.

Or. en

Amendment 27

Ivars Ijabs, Svenja Hahn

Proposal for a directive

Annex I – paragraph 1 – point 3

Directive 2014/32/EU

Annex I – point 10.6 – subparagraph 3

Text proposed by the Commission	Amendment
Text proposed by the CommissionThe presented results shall be traceable to the measuring instrument under metrological control. Security measures shall provide evidence of tampering.	AmendmentThe presented results shall be traceable to the measuring instrument under metrological control and shall be fully documented. Security measures shall provide forensic evidence of tampering.

Or. en

Amendment 28

Ivars Ijabs

Proposal for a directive

Annex I – paragraph 1 – point 3

Directive 2014/32/EU

Annex I – point 10.6 – subparagraph 4

Text proposed by the Commission	Amendment
Text proposed by the CommissionThe measurement result presented by the respective technical solution shall serve as the basis for the price to pay, when applicable.	AmendmentThe measurement result presented by the respective technical solution shall exclusively serve as the basis for the price to pay, when applicable.

Or. en

Amendment 29

Stefano Cavedagna

Proposal for a directive

Annex I – paragraph 1 – point 3

Directive 2014/32/EU

Annex I – point 10.6 – subparagraph 5

Text proposed by the Commission	Amendment
Text proposed by the CommissionThe data may be made available, in addition, by means of metrologically controlled remote channel.	Amendmentdeleted

Or. it

Amendment 30

François Kalfon

Proposal for a directive

Annex I – paragraph 1 – point 3

Directive 2014/32/EU

Annex I – point 10.7

Text proposed by the Commission	Amendment
Text proposed by the Commission10.7. By way of derogation from point 10.4., for measuring systems for EVSE and measuring systems for compressed gas dispensers, the measurement data shall be fully established in a device or a system so that it can be immediately presented to the consumer.	Amendment10.7. By way of derogation from point 10.4., for measuring systems for EVSE and measuring systems for compressed gas dispensers, the measurement data shall be fully established in a device or a system, including cloud-based systems, so that it can be immediately presented to the consumer.

Or. en

Amendment 31

Stefano Cavedagna

Proposal for a directive

Annex III – paragraph 1 – point 1

Directive 2014/32/EU

Annex V – Part 2

Text proposed by the Commission	Amendment
Text proposed by the CommissionAn active electrical energy meter is an instrument which measures the active electrical energy consumed in a circuit or transferred between circuits.	AmendmentAn active electrical energy meter is an instrument which measures the active electrical energy consumed in a circuit.

Or. it

Amendment 32

François Kalfon

Proposal for a directive

Annex IV

Directive 2014/32/EU

Annex Va – Part 2 – paragraph 3

Text proposed by the Commission	Amendment
Text proposed by the CommissionMeasuring systems for EVSE can also have their basic metrology provided by a separately type approved meter which has been tested for compliance with a recognised metering standard with equal or more stringent requirements.	AmendmentMeasuring systems for EVSE can also have their basic metrology provided by a separately type approved active meter which has been certified under the directive.

Or. en

Amendment 33

Stefano Cavedagna

Proposal for a directive

Annex IV

Directive 2014/32/EU

Annex Va – Part 2 – Table 1

Text proposed by the Commission	Amendment
	AC	AC	DC	DC
Imin	≤ Itr	≤ Itr	≤ Itr	≤ Itr
Itr	≤ 5 A	≤ 0,1 ∙ Imax	≤ 25 A	≤ 0,1 ∙ Imax
Imax	≤ 80 A	> 80 A	≤ 500 A	> 500 A

	AC	AC	DC	DC
Imin	≤ Itr	≤ Itr	≤ Itr	≤ Itr
Itr	≤ 5 A	≤ 0,1 ∙ Imax	≤ 25 A	≤ 0,1 ∙ Imax
Imax	≤ 63 A	> 63 A	≤ 500 A	> 500 A

Or. it

Justification

This adapts the technical requirements to the operational reality of the European market, since the reference 80 A is not permitted on the EU market (63 A 3-phase limit).