What changed between the adopted text of 13 Mar 2024 and the adopted text of 25 Nov 2025

Removed:(19) The use of nickel in stainless steel and in components that transmit electric current has been considered safe in toys by the Scientific Committee on Health, Environment and Emerging risks and should be allowed. Other substances that are necessary to transmit electric current should be permitted in toys to allow for the making available of electric toys if such substances are completely inaccessible for a child playing with the toy and therefore do not present a risk.

Removed:(20) As batteries are regulated by Regulation (EU) …/…[P.O. insert serial number for Regulation on batteries and waste batteries], the requirements regarding chemical substances in toys should not apply to the batteries included in toys. However, toys that include batteries should be designed in such a way that the batteries are difficult for children to access. In situations where, due to the nature, size or form factor of the toy, or of the small electronics contained within, it would not be possible to design the toy in a way that the internal battery would be removable and replaceable by the end-user while also ensuring the safety of the child and the safe continued use of the toy, the toy could be designed in such a way as to make the battery removable and replaceable by independent operators. [Am. 8]

Removed:(21) Existing limit values for certain chemical substances and their corresponding test methods have proven to be appropriate for the protection of children as regards those substances and should be maintained. In order to adapt to new scientific knowledge, the Commission should be empowered to revise those limit values where necessary in line with the precautionary principle and the One Health approach. Limit values for arsenic, cadmium, chromium VI, lead, mercury and organic tin, which are particularly toxic and which should therefore not be intentionally used in toys, should be set out at half the values that are considered safe by the relevant scientific body, in order to ensure that only traces that are compatible with good manufacturing practice are present in the toy. Use of chromium VI, cadmium, mercury and lead, highly toxic elements, should not be allowed in toys, unless their presence is technically unavoidable under good manufacturing practice and their residues do not exceed the limit of detection in the homogenous material. [Am. 248]

Removed:(21a) Lead is a naturally occurring toxic metal that may cause lung, brain, stomach, and kidney cancer in humans. It can enter drinking water when plumbing materials that contain lead corrode, especially where the water has high acidity or low mineral content that corrodes pipes and fixtures. The Directive (EU) 2020/2184 sets out provisions as regards lead content in water intended for human consumption. It can therefore not be excluded that toys produced with the use of water might contain minimal residues of lead due to the water used in the manufacturing process. Such residues should be considered as technically unavoidable under good manufacturing practice where it is not possible to eliminate them via available filtering or absorption methods. [Am. 249]

Removed:(22) Directive 2009/48/EC includes limit values for certain substances in toys intended for children under 36 months or intended to be put in the mouth. Those substances have shown to also pose a risk to older children, as they could be equally exposed to such chemicals via skin contact or inhalation. These limit values should therefore apply to all toys. Since the adoption of the limit values for bisphenol A in Directive 2009/48/EC, new scientific data has emerged. The European Food Safety Authority (EFSA) re-evaluated the risks to public health from dietary exposure to bisphenol A in April 2023 concluding that exposure to bisphenol A is a health concern for consumers across all age groups. EFSA has established a new tolerable daily intake of bisphenol A which is significantly lower than the previous one. In view of this scientific evidence, bisphenol A should fall under the generic prohibition for CMR substances in toys.

Removed:(22a) Per- and polyfluorinated alkyl substances (PFASs) are a large family of more 10 000 man-made chemicals. Since their emergence in the late 1940s, PFASs have been used in an increasingly wide range of consumer products. Exposure to the most studied PFASs has been associated with a range of adverse health effects, including thyroid disease, liver damage, obesity, diabetes and reduced response to routine vaccinations, as well as increased risk of breast, kidney and testicular cancer. Toys should not contain any per- and polyfluorinated alkyl substances (PFASs). [Am. 9]

Removed:(23) To ensure adequate protection from specific chemical substances in case of new scientific knowledge, the Commission should be empowered to adopt delegated acts establishing specific limit values for any chemical substance used in toys. If justified in cases of toys involving a higher degree of exposure, those delegated acts should set out specific limit values for toys intended for use by children under 36 months and in other toys intended to be put in the mouth, taking into account the requirements set out in Regulation (EC) No 1935/2004 and the differences between toys and materials which come into contact with food or articles from which risks may arise due to oral contact through their use as a food contact material. Fragrances in toys entail special risks for human health. Therefore, specific rules should be set out for the use of fragrances in toys and for the labelling of fragrances. The Commission should be empowered to adopt delegated acts to amend those rules to allow for adaptations to technical and scientific progress.

Removed:(24) Where the hazards that a toy may present cannot be completely addressed by design, the residual risk should be addressed by product-related information directed at the supervisors of the children in the form of warnings, taking into account the capacity of those supervisors to take the necessary precautions. In order to make sure the information is displayed efficiently, the manufacturer can add a QR-code that provides a link to the instruction in a digital format, but should always mark warnings on the toy, on an affixed label or on the packaging. [Am. 10]

Removed:(25) To prevent misuse of warnings to circumvent the applicable safety requirements, the warnings provided for certain categories of toy should not be allowed if they conflict with the intended use of the toy. To ensure that supervisors are aware of any risks associated with the toy, it is necessary to ensure that the warnings are clearly intelligible, legible and visible. [Am. 11]

Removed:(25a) To ensure awareness of any risks associated with the toy, especially in cases where the purchase is made through distance and online sales, it should be ensured that the warnings online are clearly legible and immediately visible. [Am. 12]

Removed:(26) Economic operators should act responsibly and in full accordance with the legal requirements applicable when placing or making toys available on the market.

Removed:(27) In order to ensure a high level of protection of the health and safety of children and fair competition on the internal market, economic operators should be responsible for the compliance of toys with this Regulation, in relation to their respective roles in the supply chain.

Removed:(28) As certain tasks can be executed only by the manufacturer, it is necessary to distinguish clearly between the obligations of the manufacturer and the operators further down the distribution chain. It is also necessary to distinguish clearly between the obligations of the importer and the distributor, as the importer introduces toys from third countries to the Union market. The importer should make sure that those toys comply with the applicable Union requirements.

Removed:(29) In order to facilitate communication between economic operators, market surveillance authorities and consumers or other end-users, manufacturers and importers should indicate a website, email address or other digital contact in addition to the postal address.

Removed:(30) The manufacturer, having detailed knowledge of the design and production process, is responsible for the compliance of the toy with the requirements of this Regulation and is best placed to carry out the complete conformity assessment procedure for toys. Conformity assessment should therefore remain the obligation of the manufacturer alone.

Removed:(31) To facilitate compliance of the manufacturers with their obligations under this Regulation, manufacturers should be allowed to appoint an authorised representative to carry out specific tasks on their behalf. Moreover, to ensure a clear and proportionate distribution of tasks between the manufacturer and the authorised representative, it is necessary to set out a list of tasks that manufacturers should be allowed to entrust the authorised representative with. Further, to ensure the enforceability and compliance with this Regulation, where a manufacturer established outside the Union appoints an authorised representative, the mandate should include the tasks set out in Article 4 of Regulation (EU) 2019/1020.

Removed:(32) Economic operators intervening in the supply and distribution chain should take appropriate measures to ensure that the toys they place on the market do not jeopardisepose risks to the safety and health of children under normal and reasonably foreseeable conditions of use, and that they make available on the market only toys which comply with the relevant Union legislation. [Am. 13]

Removed:(33) It is necessary to ensure that toys from third countries entering the Union market comply with all applicable Union requirements, and in particular that appropriate conformity assessment procedures have been carried out by manufacturers with regard to those toys. Importers should therefore ensure that the toys they place on the market comply with the applicable requirements, that conformity assessment procedures have been carried out and that product marking and documentation drawn up by manufacturers are available for inspection by the competent market surveillance authorities.

Removed:(34) When placing a toy on the market, importers should indicate on the toy their name and the address at which they can be contacted. Exceptions should be provided for in cases where the size or nature of the toy does not allow for such an indication, including where importers would have to open the packaging to put their name and address on the product. In such cases, the name and address should be indicated on the packaging or an accompanying document.

Removed:(35) As the distributor makes a toy available on the market after the toy has been placed on the market by the manufacturer or the importer, the distributor should act with due care to ensure that the handling of the toy does not adversely affect the compliance of that toy with this Regulation.

Removed:(36) Distributors and importers are close to the market place and should therefore be involved in market surveillance tasks carried out by competent national authorities, and should be required to participate actively in such tasks and to provide those authorities with all necessary information relating to the toy concerned.

Removed:(37) Economic operatorsAny natural or legal person that either placeplaces a toy on the market under their own name or trademark or modify a toy in such a way that compliance with applicable requirements of this Regulation may be affected, should be considered to be manufacturersmanufacturer for the purposes of this Regulation and should assume the obligations of manufacturersmanufacturer. [Am. 14]

Removed:(37a) Online marketplaces play a crucial role in the supply chain, allowing economic operators to reach a large number of customers. Given their important role in intermediating the sale of toys between economic operators and customers, online marketplaces should take responsibility for addressing the sale of toys that do not comply with this Regulation and should cooperate with market surveillance authorities. Directive 2000/31/EC of the European Parliament and of the Council provides the general framework for e-commerce and lays down certain obligations for online platforms. Regulation (EU) 2022/2065 regulates the responsibility and accountability of providers of intermediary services online with regard to illegal content, including products that do not comply with this Regulation. [Am. 15]

Removed:(38) Ensuring traceability of a toy throughout the whole supply chain, in accordance with Regulation (EU) 2023/988, helps to make market surveillance simpler and more efficient. An efficient traceability system facilitates market surveillance authorities' task of tracing economic operators who made non-compliant toys available on the market. [Am. 16]

Removed:(39) In order to facilitate the assessment of conformity with the requirements of this Regulation it is necessary to provide for a presumption of conformity for toys which are in conformity with the applicable harmonised standards that are adopted in accordance with Regulation (EU) No 1025/2012 of the European Parliament and of the Council and published in the Official Journal of the European Union. [Am. 17]

Removed:(40) In the absence of relevant harmonised standards, the Commission should be empowered to adopt implementing actsdelegated acts supplementing this Regulation by setting out common specifications for the essential safety requirements of this Regulation, provided that in doing so it duly respects the standardisation organisations’ role and functions, as an exceptional fall back solution to facilitate the manufacturer’s obligation to comply with the essential requirements, when the standardisation process is blocked or when there are delays in the establishment of appropriate harmonised standards. [Am. 18]

Removed:(41) The CE marking, indicating the conformity of a toy, is the visible consequence of a whole process comprising conformity assessment in a broad sense. General principles governing the CE marking are set out in Regulation (EC) No 765/2008. Specific rules governing the affixing of the CE marking with regard to toys should be laid down in this Regulation. Those rules should ensure sufficient visibility of the CE marking in order to facilitate market surveillance of toys.

Removed:(42) Manufacturers should create a digital product passport to provide information on the compliance of toys with this Regulation and with any other Union legislation applicable to toys. They should keep the digital product passport up to date according to reasonable best efforts and make any necessary changes when required. The digitalThe product passport should replace the EU declaration of conformity under Directive 2009/48/EC, Directive 2014/53/EU and any other Union legislation applicable to toys. It should also and include the elements necessary to assess the conformity of the toy with the applicable requirements and harmonised standards or other specifications or elements. In order to facilitate checks on toys by market surveillance authorities and to allow the actors in the supply chain and consumers to access information on the toy and on communication channels, the information on the digital product passport should be provided digitally and in a directly accessible manner, through a data carrier affixed to the toy, its packaging or the accompanying documentation. Depending on access rights, market surveillance authorities, customs authorities, economic operators and consumers should have immediate access to the respective information on the toy through the data carrier. [Am. 19]

Removed:(43) To avoid duplication of investment into digitalisation by all actors involved, including manufacturers, market surveillance authorities and customs authorities, when other Union legislation requires a product passport for toys, a single product passport should be available containing the information required under this Regulation and the other Union legislation. In addition, the digital product passport should be fully interoperable with any product passport required under other Union legislation. [Am. 20]

Removed:(44) In particular, Regulation (EU) …/… [P.O. insert serial number for the Regulation on ecodesign requirements for sustainable products] of the European Parliament and of the Council also lays down requirements and technical specifications for a digital product passport, the establishment of a Commission central registry where passport information is stored and the interconnection of that registry with the customs IT systems. That Regulation may include toys within its scope in the medium term, thus requiring that a digital product passport is available for toys. Therefore, it should be possible in the future to include more precise information in the digital product passport, in particular information related to environmental sustainability, such as the environmental footprint of a product, information useful for recycling purposes, the recycled content of a certain material, information about the supply chain, and other similar information. The. The digital product passport for toys created under this Regulation should therefore comply with the same requirements and technical elements as those set out in Regulation (EU) …/… [P.O. insert serial number for the Regulation on ecodesign requirements for sustainable products], including the technical, semantic and organisational aspects of end-to-end communication and data exchange. [Am. 21]

Removed:(45) As the digital product passport is to replace the EU declaration of conformity, it is crucial to make clear that by creating the digital product passport for a toy and by affixing the CE marking, the manufacturer declares that the toy is in compliance with the requirements of this Regulation and that the manufacturer takes full responsibility thereof. [Am. 22]

Removed:(46) Where other information than the elements required for the digital product passport is provided digitally, it is necessary to clarify that the different types of information need to be provided separately and clearly distinguished from each other but through a single data carrier. This will facilitate the work of market surveillance authorities but also provide clarity to consumers regarding the different types of information that are available to them in a digital format. [Am. 23]

Removed:(46a) The majority of toy manufacturers subject to the requirements of this Regulation are micro, small and medium sized enterprises (SMEs), for which drawing up a digital product passport is a significant challenge from an administrative and operational perspective. Therefore, the Commission should provide SMEs with additional support in order to assist them in complying with the new requirements set out in this Regulation. To this end, the Commission should publish practical guidelines and tailor-made guidance for SMEs. In particular a direct channel of communication with experts should be set up to help them perform safety assessments and to set up a digital product passport for the toys they produce. [Am. 24]

Removed:(47) Chapter VII of Regulation (EU) 2019/1020, setting up the rules for of controls on products entering the Union market applies to toys. The authorities in charge of controls, which in almost all Member States are the customs authorities, are to perform them on the basis of risk analysis as referred to in Articles 46 and 47 of Regulation (EU) No 952/2013 of the European Parliament and of the Council, its implementing legislation and the corresponding guidance. This Regulation therefore does not modify in any way Chapter VII of Regulation (EU) 2019/1020 and the way the authorities in charge of controls on products entering the Union market organise themselves and perform their activities.

Removed:(48) In addition to the framework of controls established by Chapter VII of Regulation (EU) 2019/1020, customs authorities should be able to automatically verify that a digital product passport exists for imported toys subject to this Regulation in order to strengthen the controls at the Union’s external borders and prevent non-compliant toys from entering the Union market. [Am. 25]

Removed:(49) When toys coming from third countries are placed under the customs procedure of release for free circulation, the reference to a digital product passport for those toys should be made available to the customs authorities by the economic operator. The reference to the digital product passport should correspond to a unique product identifier that is stored in the product passport registry established under Article 12 of [P.O. insert serial number for Regulation (EU) …/… on Ecodesign Requirements for Sustainable Products] (the ‘registry’). Customs authorities should carry out an automatic verification of the product passport presented for that toy, so as to ensure that only toys with a valid reference to a unique product identifier as included in the registry are released for free circulation. To carry out that automatic verification, the interconnection between the registry and the customs IT systems as provided for in [Article 13 of Regulation (EU) …/… on ecodesign requirements for sustainable products] should be used. [Am. 26]

Removed:(50) Where other information than the unique product identifier and the unique operator identifier is stored in the registry, the Commission should be empowered to adopt delegated acts allowing customs authorities to verify the consistency between that additional information and the information made available by the economic operator to customs, in order to ensure the compliance of toys placed under the customs procedure of release for free circulation with this Regulation.

Removed:(51) The information included in the digital product passport allows customs authorities to enrich and facilitate risk management and enables more targeted controls at the Union’s external borders. Therefore, customs authorities should have the possibility to retrieve and use the information included in the digital product passport and the registry for carrying out their tasks in accordance with Union legislation, including for risk management in accordance with Regulation (EU) No 952/2013. [Am. 27]

Removed:(52) It is appropriate to provide for the publication of a notice in the Official Journal of the European Union indicating the date when the interconnection between the registry and the EU Customs Single Window Certificates Exchange System referred to in Article 13 of [P.O. insert serial number for Regulation (EU) …/… on Ecodesign Requirements for Sustainable Products] becomes operational in order to facilitate public access to that information. Similar publication should be provided in case further EU customs IT systems become operational. [Am. 28]

Removed:(53) The automatic verification by customs of the reference to the digital product passport for toys entering the Union market should not replace or modify the responsibilities of the market surveillance authorities but only complement the overall framework for controls on products entering the Union market. Regulation (EU) 2019/1020 should continue to apply to toys so as to ensure that market surveillance authorities carry out checks of the information contained in products passports, checks on toys within the market in accordance with that Regulation and, in case of suspension of release for free circulation by the authorities designated for controls at the Union’s external borders, determine the compliance and risks of toys pursuant to Chapter VII of Regulation (EU) 2019/1020. [Am. 29]

Removed:(54) Children are daily exposed to a wide range of different chemicals originating from various sources that have negative effects as individual substances or mixtures, but also through combined exposure. Significant progress has been made to close some knowledge gaps on the impact of the combination effect of those chemicals. However, the safety of chemicals is currently usually assessed through the evaluation of single substances and in some cases of mixtures intentionally added for particular uses. Further efforts are needed to better understand the impact of the combination effect of chemicals. In order to provide the highest protection for children and the environment in general, the most harmful substances should be generally banned in toys to ensure that there is no exposure to them in toys. The specific limit values for chemicals in toys should account for combined exposure from different sources to the same chemical substance. In addition, manufacturers should be required to carry out an analysis of the various hazards that the toy may present and an assessment of the potential exposure to such hazards and, as part of the assessment of chemical hazards, to consider known cumulative or synergistic effects of the chemicals present in the toy, to ensure that risks from simultaneous exposure to multiple chemicals are taken into account. Furthermore, toys are to comply with general chemicals legislation, in particular Regulation (EC) No 1907/2006 of the European Parliament and of the Council; this Regulation does not modify the obligations for the assessment of the safety of the chemical substances or mixtures themselves that may be applicable in accordance with that Regulation. [Am. 250]

Removed:(54a) In order to provide adequate expertise, support, and thorough scientific evaluations, an appropriate and stable funding for ECHA should be ensured. [Am. 30]

Removed:(55) Manufacturers should prepare the technical documentation describing all relevant aspects of toys including the safety assessment of all hazards that the toy may present and how they have been addressed, to allow market surveillance authorities to perform their tasks efficiently. The manufacturer should be required to make that technical documentation available to national authorities on request or to notified bodies in the context of the relevant conformity assessment procedure.

Removed:(56) To ensure that toys comply with the essential requirements, it is necessary to lay down appropriate conformity assessment procedures to be followed by the manufacturer. Internal production control based on the manufacturer’s own responsibility for the conformity assessment is adequate where it has followed the harmonised standards, the reference of which has been published in the Official Journal of the European Union, or common specifications covering all the particular safety requirements for the toy. In cases where such harmonised standards or common specifications do not exist, the toy should be submitted to third party verification, in this case EU-type examination. The same should apply if one or more such standards has been published with a restriction in the Official Journal of the European Union, or if the manufacturer has not followed such standards or specifications completely, or only in part. The manufacturer should submit the toy to EU-type examination in cases where it considers that the nature, design, construction or purpose of the toy necessitates third party verification.

Removed:(57) Since it is necessary to ensure a uniformly high level of performance of bodies performing conformity assessment of toys throughout the Union, and since all such bodies should perform their functions to the same level and under conditions of fair competition, requirements should be set for conformity assessment bodies wishing to be notified in order to provide conformity assessment services under this Regulation.

Removed:(58) If a conformity assessment body demonstrates conformity of the toy with the criteria laid down in harmonised standards, itthe toy should be presumed to comply with the corresponding requirements set out in this Regulation. [Am. 31]

Removed:(59) The system set out in this Regulation should be complemented by the accreditation system provided for in Regulation (EC) No 765/2008. Since accreditation is an essential means of verifying the competence of conformity assessment bodies, it should be used for the purposes of notification. In particular, transparent accreditation as provided for in Regulation (EC) No 765/2008, ensuring the necessary level of confidence in certificates of conformity, should be the only means of demonstrating the technical competence of conformity assessment bodies.

Removed:(60) Conformity assessment bodies frequently subcontract parts of their activities linked to the assessment of conformity or have recourse to a subsidiary. In order to safeguard the level of protection required for toys to be placed on the market, it is essential that conformity assessment subcontractors and subsidiaries fulfil the same requirements as notified bodies in relation to the performance of conformity assessment tasks. Therefore, it is important that the assessment of the competence and the performance of bodies to be notified, and the monitoring of bodies already notified, cover also activities carried out by subcontractors and subsidiaries. In particular, excessive recourse to subsidiaries and subcontractors, in a manner that would call into question the competence of the notified body or its supervision by the notifying authority should be avoided.

Removed:(61) In order to ensure a consistent level of quality in the performance of conformity assessment of toys, it is necessary not only to consolidate the requirements that conformity assessment bodies wishing to be notified must fulfil, but also, in parallel, to set requirements that notifying authorities and other bodies involved in the assessment, notification and monitoring of notified bodies must fulfil.

Removed:(62) Since notified bodies may offer their services throughout the Union, it is appropriate to give the other Member States and the Commission the opportunity to raise objections concerning a notified body. It is therefore important to provide for a period during which any doubts or concerns as to the competence of conformity assessment bodies can be clarified before they start operating as notified bodies. The Commission should by way of implementing acts request the notifying Member State to take the necessary corrective measures in respect of a notified body that does not meet the requirements for its notification.

Removed:(63) In the interests of competitiveness, it is crucial that notified bodies apply the conformity assessment procedures without creating unnecessary burdens for economic operators. For the same reason, and to ensure equal treatment of economic operators, consistency in the technical application of the conformity assessment procedures needs to be ensured. That can best be achieved through appropriate coordination and cooperation between notified bodies. Such coordination and cooperation should respect the Union competition rules.

Removed:(64) Market surveillance is an essential instrument inasmuch as it ensures the proper and uniform application of Union legislation. Regulation (EU) 2019/1020 sets out the framework for market surveillance of products subject to Union harmonisation legislation, including toys. Since this Regulation replaces Directive 2009/48/EC, the rules on market surveillance and controls on products entering the Union market set out in Regulation (EU) 2019/1020, including the specific requirement set out in Article 4 of that Regulation that toys are to be placed on the market only if there is an economic operator established in the Union responsible for the tasks specified in that Article, continue to apply to toys. Member States should therefore organise and carry out market surveillance of toys in accordance with that Regulation.

Removed:(65) Directive 2009/48/EC provides for a safeguard procedure allowing the Commission and other Member States to examine the justification for a measure taken by a Member States against toys that the Member State considers to be non-compliant. That procedure ensures that interested parties are informed of measures intended to be taken with regard to toys posing a risk to the health or safety of persons and that such toys are consistently addressed by all market surveillance authorities in the Union market The procedure should therefore be maintained.

Removed:(66) Where the Member States and the Commission agree as to the justification of a measure taken by a Member State, no further involvement of the Commission should be required. Where there are objections to such a measure, the Commission should, by means of implementing acts, determine whether a national measure in respect of a toy is justified.

Removed:(67) Experience with Directive 2009/48/EC has shown that new toys available on the market which were compliant with the applicable particular safety requirements when placed on the market have in specific cases posed a risk to children and therefore do not comply with the general safety requirement. Provisions should be made to ensure that market surveillance authorities can take action against any toy presenting a risk to children, even when it is compliant with the particular safety requirements. The Commission should, by means of implementing acts, determine whether a national measure in respect of compliant toys which a Member State finds to pose a risk to the health and safety of children or other persons is justified.

Removed:(67a) Under Article 20 of the Regulation (EU) 2023/988 manufacturers are required to notify, through the Safety Business Gateway, of any occurrence of an injury as a result of using a product. On the basis of that information, the Commission should evaluate the need and the feasibility of a Pan-European injury database that could bring additional information and knowledge to economic operators, relevant stakeholders and experts, with a view to assessing the effectiveness of the specific Union regulatory framework for toys. [Am. 32]

Removed:(68) In order to take into account technical and scientific progress or new scientific evidence, the power to adopt acts in accordance with Article 290 of the Treaty on the Functioning of the European Union should be delegated to the Commission in respect of amending this Regulation by adapting the specific warnings to be affixed on toys, adopting specific requirements concerning chemical substances in toys and granting derogations to include specific uses allowed in toys of substances subject to generic prohibitions.

Removed:(69) In order to take into account technical and scientific progress as well as the level of digital readiness of market surveillance authorities and of children and their supervisors, the power to adopt acts in accordance with Article 290 of the Treaty on the Functioning of the European Union should also be delegated to the Commission in respect of amending this Regulation with regard to the information that is to be included in the digital product passport and the information that is to be included in the digital product passport registry. [Am. 33]

Removed:(70) In order to facilitate the work of customs authorities in relation to toys and their compliance with the requirements set out in this Regulation, the power to adopt acts in accordance with Article 290 of the Treaty on the Functioning of the European Union should be delegated to the Commission in respect of supplementing this Regulation by determining the additional information stored in the registry to be controlled by customs authorities, and in respect of amending the list of commodity codes and product descriptions to be used for customs controls in accordance with this Regulation on the basis of Annex I to Regulation (EEC) No 2658/87 of the European Parliament and of the Council.

Removed:(71) When adopting delegated acts under this Regulation, it is of particular importance that the Commission carry out appropriate consultations during its preparatory work, including at expert and stakeholder level, and that those consultations be conducted in accordance with the principles laid down in the Interinstitutional Agreement of 13 April 2016 on Better Law-Making. In particular, to ensure equal participation in the preparation of delegated acts, the European Parliament and the Council receive all documents at the same time as Member States’ experts, and their experts systematically have access to meetings of Commission expert groups dealing with the preparation of delegated acts. [Am. 34]